CN
Product Isolated Barrier NPEXB-KM31

NPEXB-KM31

Analog output isolated barrier, it transfers 4~20mA signals from a safe area to a hazardous area. It allows transmission of HART communication signals. The input, output, and power supply are galvanically isolated from each other. Besides, the LFD (line fault detection of field connections) function of output circuit is available.

Input signal

Output signal

Channels

Power Supply Mode

HART

LFD

Share
NPEXB-KM31
Product details Technical data Accessory Download
contrast

【Core technology】

安全栅K.png.jpg

【Installation and disposal】



BB.gifCC.gif

                                    

Installation                                               Disposal 



【Technical data】 Supply Input Output Transfer characterisics General parameters EMC data Operating conditions State 【Mechanical specifications】 Mechanical specifications 【Certified data】 Certified data
Supply
Power supply 20 ~ 30 V DC
Input
Input signal 4 ~ 20mA, HART
Input voltage drop ≤ 1.2 V
Output
Output signal 4 ~ 20mA, HART
Load resistance 80 ~ 800 Ω
Transfer characterisics
Accuracy 0.1 %F.S.
Temperature drift 30 ppm/℃
General parameters
Response time ≤ 2 ms
Power dissipation ≤ 1.0 W
EMC data
Electromagnetic compatibility IEC 61326-3-1
Dielectric strength ≥ 3000V AC (intrinsically safe side / non-intrinsically safe side); ≥ 1500V AC (Power supply /non-intrinsically safe side)
Insulation resistance ≥ 100 MΩ (Input /Output/Power supply)
Operating conditions
Operation temperature -40°C ~ +70°C
Storage temperature -40 ℃ ~ +80 ℃
Suitable location Mounting in safe area, and connected to the intrinsic safety apparatus in hazardous area zone 0, zone 1, zone 2, ǀ, ⅡA, ⅡB, ⅡC, ⅢC, T4 ~ T6. When the apparatus used in zone 2, please comply with the special conditions of use in the instructions.
State
Safe state The output signal is less than 3.6mA or greater than 21.5mA
Mechanical specifications
Connection method Screw connection
Dimension 12.8mm (W) × 110mm (H) × 117mm (D)
Mounting type DIN35 mm
Certified data
Product approvals ATEX, IECEx, SIL, CCC
Type of equipment Type A
Hardware fault margin(HFT) 0
Mode of demand low/high
Safety integrity level(SIL) SIL2
λS (1 FIT=10-9/h) 541.155 FIT
λDU (1 FIT=10-9/h) 25.298 FIT
λDD (1 FIT=10-9/h) 0.546 FIT
λTOTAL (1 FIT=10-9/h) 567.606 FIT
SFF ＞ 60%
PFDavg(T1=1Y) 1.11E-04
PFH 2.53E-08 1/h
Ex marking [Ex ia Ma] Ⅰ、[Ex ia Ga] ⅡC、[Ex ia Da] ⅢC、Ex ec [ia Ga] ⅡC T4 Gc
Um 250 V
Uo 25.2 V (Terminals 1, 2)
Io 93 mA (Terminals 1, 2)
Po 586 mW (Terminals 1, 2)
Co (ǁC) 0.107 μF (Terminals 1, 2)
Lo (ǁC) 4.2 mH (Terminals 1, 2)
NPPB-DIN Bus rail power supply
35mm standard rail
NPPB-BS210 I/O terminal base
Connect the rail BUS base, external power is introduced through the terminal block of the base. If a redundant power module is selected, this terminal can be left unselected.
NPPB-BSC028 Dust cover
Protect the exposed bus and split the combination as needed.
NPPB-SS5 Limiter
For fixed position, standard 2 sets
NPPB-TS35B Fixed piece
Material: metal iron, used for rail load-bearing reinforcement, standard 2 pieces
NPEXA-C11

一入一出

热电偶输入安全栅

De-contrast Clear contrast bar

Nanjing New Power Electric Co.,Ltd.

Addr.: 6 Floor, Building1, New Space Development Center, No.126 tianyuan middle road, jiangning district, Nanjing

Zip code: 211112

Tel: +86(25)84459303 84459429 84459479

Fax: +86(25)84519256

E-mall: master@anpe.cn

Service Tel: 800-828-9961

New park: 19 Jinxin Middle Road, Jiangning District, Nanjing (Jiangning Development Zone)

Newpwr official website

Newpwr WeChat official account

== Friendly link ==
南京优倍自动化系统有限公司
Nanjing New Power Electric Co.,Ltd. @ China All Rights Reserved Su ICP No. 14051850
De-contrast Clear contrast bar